ISO-P64 / ISO-C64 Isolated Digital I/O Board

Features:
  • ISO-P64:64-channel optically isolated digital input
  • DC/DC converter build-in
  • Four isolated bank
  • 3000Vdc isolation voltage
  • Interrupt handling
  • Interrupt source : channel 0 and channel 16
  • ISO-C64:64-channel open collector digital output

Application:
  • Factory Automation
  • Product Test
  • Laboratory Automation
Power requirement
  • Power consumption :
    ISO-P64: +5Vdc  @400mA (max.)
    ISO-C64: +5Vdc  @800mA (max.)
General Environmental
  • Operating temp : 0~50 deg /C
  • Storage temp : -20 ~70 deg /C
  • Huminity : 0~90% non-condensing
  • Dimensions : 163 mm x 115mm

Ordering Information 

ISO-P64 : Isolated 64-chanel digital Input Board
ISO-C64 : Isolated 64-chanel digital Output Board
Option :
DN-37 : 37-Pin D-sub connector Screw terminal Board
DB-37 : (Direct connect )
37-pin D-sub connector Screw terminal Board
CA-4002 : 37-pin Male D-sub connector with plastic cover 		Functional Description

The ISO-P64 has 32 channels of optically isolated digital inputs and 32-channels of optically isolated digital outputs, arranged into four isolated banks. Each input chanel use a photo-coupler input which allows either internal power supply or external power selected by jumper. Isolated input channels 0~15 are designed into group A, channels 16~31 are designed into group B, Isolated input channels 32~47 are designed into group A, channels 48~63 are designed into group B. The power supply of the input port may use the external power or the the power from the PC side using DC to DC converter. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The ISO-P64 has one 37-pin D-sub connector ans one 40-pin header. The 40-pin to D-sub 37 flat cable is used to fixed with the case. The user can connect the digital signal through the second D-sub connector. Each D-sub connector contains 16inputs chnnel and 16 output channel.
The ISO-C64 has 64 channels of  optically isolated digital outputs, arranged into four isolated banks. Each digital output offers a darlington transistor and integral suppression diode for inductive load. Isolated output channels are designed into group A, B, C, D.  The power supply of the outoput port should be  use the external power.

Specification:

Isolated Input

  • Type : Isolated Current input
  • Isolation Voltage : 3750V (Using External Power) , 3000V (Using Internal Power)
  • Input Voltage : 3.5V to 30V
  • Input impedance : 3K ohm 
  • Input Current : DC24V @ 7.67mA / Each channel
  • Response time : 10Khz Max

Open-collector Output

  • Type : Isolated open-collector : 100mA per channel
  • External voltage : 30Vdc(max.)
  • Response time : 1Khz (typical)
Software :
  • NAPxxx series : Software Toolkit for Windows 95/98/NT/DOS/LabView