The ISO-AD32H/L ( H for high gain / L for low gain ) is a bus-type isolated 12-bit A/D board for PC/AT compatible computers. The isolation inputs can operate with up to 500Vrms of common-mode voltage.
The ISO-AD32H/L features a 200KHz 12-bit analog-to-digital converter ,on board 1 K byte FIFO buffer ,32 singled-ended or 16 differential analog input channels .The analog input allows auto-channel /gain scan . This board support gap-free A/D conversion at 200KHz sampling rates for single channel or 100KHz sampling rates for channel scan .
The "Hands-Off" design permits all board parameters (channel selection, gain, input type ,operating mode ) to be performed in software . Once installed , you will never have to take care it again.
The board's innovative design improve several drawbacks of the conventional isolated A/D card . Such as :
1.The speed is faster ; up to 200KHz
2. The sampling rate can be programmable
3. On board FIFO buffer support gap-free A/D conversion and work well under NT and 95 environment.
4. High channel count input can be implemented in half size .
- 32 single-ended or 16 differential input channels, 500VDC photo-isolation protection
- Maximum 200K 12-bit sampling rate
- Built-in 1K byte FIFO
- Single -ended or differential input, can be jumper selectable
- Auto-channel / gain scan
- Command set programming
- Gap-free A/D conversion
Applications
- Data acquisition
- Waveform analysis
- Harsh environment operation
- Signal isolation
ISO-AD32L :32-channel/12-bit Low Gain/ Bus Isolated Analog Intput Board
Option :
DN-37 : 37-Pin D-sub connector Screw terminal Board
DB-37 : (Direct connect )
37-pin D-sub connector Screw terminal Board
Software :
- NAPWIN : Software Toolkit for Windows 95/98
- NAPWNT: Software Toolkit for Windows NT 4.0
- NAPVIEW: Software Toolkit for LabVIEW
- NAPX:ActiveX Control (OCX) for Windows 95/98/NT